Mini LED Moving Head Light, DMX512 RGBW 4-in-1

A small moving head that throws a tight, punchy beam across a dance floor.

This compact fixture pairs RGBW color mixing with precise pan/tilt and several control modes. It fits DJs, small venues, bars, KTV rooms, and event work, delivering focused beams and quick movement for parties, weddings, and club shows.

The 10W RGBW 4-in-1 LED mixes from saturated colors to clean whites, and the 1 degree beam angle keeps beams concentrated for aerial and spot effects. It runs on standard DMX512 with 11/13-channel modes for control over dimming, color, movement, strobe, and built-in programs. Voice-activated, auto, and master-slave modes let you skip the console. The housing blends aerospace aluminum alloy and ABS, with fan cooling to hold performance; the LED is rated up to 50,000 hours. Output is about 1130 lux at 5 m, color temperature about 700-8000K, and CRI Ra >= 70. Pan (X-axis) reaches 540 degrees with fine-tuning, tilt (Y-axis) up to 205 degrees. The 0-100% linear dimmer gives smooth fades, and strobe runs 1-25 Hz. A 4-digit display with tactile keys handles addressing and mode selection, and three-core XLR in/out connectors support DMX daisy-chaining. IP20 rated for indoor use; operating temperature about -20 degrees C to 40 degrees C.

Why we picked it

• Flexible control - DMX512, sound-active, auto, and master-slave modes cover both programmed and plug-and-play setups.
• Tight, precise beams - 540 degree pan, 205 degree tilt, and a 1 degree beam create focused, dynamic effects.
• Steady output - Fan cooling and mixed metal/ABS build support long runs in clubs and bars.

Good to know

Internal drive uses precision chain teeth and a rubber synchronous belt for smooth, low-noise movement. Each package includes 1 stage light, a power cord, an install hanger, mounting screws, and an English manual. Fits truss, lighting stands, or ceiling mounts.

Common questions

Q: Works with a standard DMX controller?
A: Yes. It uses DMX512 with 11/13-channel modes, compatible with most DMX controllers.

Q: Can it run without a console?
A: Yes, via voice-activated, auto, or master-slave modes.

Q: Good for permanent bar or club installs?
A: Yes, for indoor fixed installs, mounted securely and run within the rated temperature range.

Q: Can I link several units?
A: Yes. Daisy-chain them via three-core XLR for DMX, or use master-slave for synced effects.